piefum Posted March 8, 2010 Share Posted March 8, 2010 Hi All do someones know if there are plans to upgrade the GeoMacro drivers in order to use the EnDat 2.2 (full digital, no incremental signals) encoders? thanks gigi Link to comment Share on other sites More sharing options...
Sina.Sattari Posted March 8, 2010 Share Posted March 8, 2010 [quote='piefum' pid='317' dateline='1268047721'] Hi All do someones know if there are plans to upgrade the GeoMacro drivers in order to use the EnDat 2.2 (full digital, no incremental signals) encoders? thanks gigi [/quote] Gigi, The development on Geo MACRO drives has been stopped for a while now. Although Delta Tau is in process of developing a new replacement for these drives with much more capabilities, it has been delayed because of various reasons. At the moment, the best replacement would be a Geo Brick with MACRO option and to use it as a slave device on the MACRO ring if you need EnDat 2.2 support. Link to comment Share on other sites More sharing options...
piefum Posted March 9, 2010 Author Share Posted March 9, 2010 Hi Sina [quote='Sina' pid='318' dateline='1268067540'] The development on Geo MACRO drives has been stopped for a while now. Although Delta Tau is in process of developing a new replacement for these drives with much more capabilities, it has been delayed because of various reasons. [/quote] thanks a lot for your info. Can you tell us something about the schedule of these new drivers? When we can expect them? thanks gigi Link to comment Share on other sites More sharing options...
Sina.Sattari Posted March 10, 2010 Share Posted March 10, 2010 The design process for the new drives has already been started, but I won't expect anything to be ready for customer use until early 2011. Link to comment Share on other sites More sharing options...
Recommended Posts