Amin Posted February 8, 2011 Share Posted February 8, 2011 Does anybody know who to save the data collected with "Gather" command in a formatted (columns) text file by using the commands in a PLC or a motion program (not by using the PMACPlotPro)? Let's say for the DAC output and the Following error of motor 1 Thanks, Link to comment Share on other sites More sharing options...
Sina.Sattari Posted February 8, 2011 Share Posted February 8, 2011 Amin, Follow this post: [url=http://forums.deltatau.com/showthread.php?tid=178]http://forums.deltatau.com/showthread.php?tid=178[/url] Regards, Link to comment Share on other sites More sharing options...
meindert.norg Posted February 11, 2011 Share Posted February 11, 2011 Amin, I don't know of any PLC commands that log directly into a text-file on a PC, but if you have access to Matlab, the following discussion might help: [url=http://forums.deltatau.com/showthread.php?tid=354]Executing moves and traces (gather data) from Matlab [/url]. If you have no access to Matlab, you can still stream this data to a terminal (e.g. [url=http://ttssh2.sourceforge.jp/]Tera Term[/url]) using a serial cable between your controller and the PC. Regards, Meindert Link to comment Share on other sites More sharing options...
Recommended Posts