May be something wrong about the user manual of ACC-28E

[aTURBOPMAC2USER]

Dear all, in the user manual of ACC-28E(newest version,which can be downloaded from the manual page), page 14, does the addresses of node 7,10,11 are the right addresses?

[Omron Forums Support]

Those addresses are incorrect.

Node 7 addresses are X:$C0AC,C0AB,C0AE,C0AF;

Node 10 are X:$C0B0,C0B1,C0B2,C0B3;

Node 11 are X:$C0B4,C0B5,C0B6,C0B7 addresses.

 

This is corrected in the new edition which hopefully will be released soon. Thanks for reporting.

[steve.milici]

See the next page for Turbo PMAC addresses.

[Omron Forums Support]

Turbo addresses are correct, but MACRO Station and PMAC2 Ultralite addresses on page 14 are incorrect, as stated in my last post. The correct addresses can also be seen in other I/O accessory manuals such as the ACC-11E or ACC-65E.