SurfChiller Posted June 12, 2014 Share Posted June 12, 2014 Hi, i have a problem connecting to the ppmac, because my subnet is not big enough to support 0.100, so how to change the ip to my subnet? thanks for your support, SurfChiller Link to comment Share on other sites More sharing options...
steve.milici Posted June 12, 2014 Share Posted June 12, 2014 The section “Changing Power PMAC’s IP Address” in the “Power PMAC IDE” manual has a complete description of this task. You can access this manual on our Forum’s FileDepot under the “Power PMAC” folder then “Manuals”. Here is a link to this site: http://forums.deltatau.com/filedepot/ [FILE REMOVED] Link to comment Share on other sites More sharing options...
SurfChiller Posted August 18, 2014 Author Share Posted August 18, 2014 I tested it, but I`m unable to change the ip from 192.168.0.200 to 192.168.178.200. Are there any resolves for this? Link to comment Share on other sites More sharing options...
steve.milici Posted August 18, 2014 Share Posted August 18, 2014 To properly troubleshoot this issue we will need to know at what point in the procedure you get the failure. What is the version of PPMAC firmware and what is the IDE version? Also - are you able to communicate at the default IP address? Link to comment Share on other sites More sharing options...
SurfChiller Posted August 19, 2014 Author Share Posted August 19, 2014 thx for reply. now it works, i have updated my ide thx for help Link to comment Share on other sites More sharing options...
Recommended Posts