jongjin86 Posted December 16, 2015 Share Posted December 16, 2015 Hi I use Powerpmac with EtherCAT option. And hilscher product NT100-RE-DN/ML. It is converting DeviceNET sensor signal to EtherCAT. I was set up device according to this process . But Pmac does not receive any signal.(figure 4 IO data, In the NT100 are normally signal is transmit) Q1. Wrong setting process? (ex. add global include or plc programs) Q2. The difference between Local device and External file(figure3 read form tab) Q3. How to use “Add new IOs” button(address setup, index set up, data type...). Q4. How to use “Go to variable definition” button(figure4) Please answer about my question. Thank you. Link to comment Share on other sites More sharing options...
Omron Forums Support Posted December 16, 2015 Share Posted December 16, 2015 I use Powerpmac with EtherCAT option. And hilscher product NT100-RE-DN/ML. It is converting DeviceNET sensor signal to EtherCAT... ... JongJin; Based upon the descriptions within your post's images, I recommend using the attached setup document as a guide for setting up your device. Keep in mind your Gateway first needs to be programmed/setup using whatever software and documentation Hilscher has provided. Then following the ACC-52ECx User Manual set up your PPMAC with the Hilscher Gateway device connected, (SEE ATTACHED). Be sure to: Set the Global Clock, and Update your Device (xml) file prior to "Configuring the Master". NOTE: the ACC-52ECx is a simple Delta Tau, EtherCAT I/O device and its manual contains PPMAC setup instructions with screen shots. If you are still having trouble call me at +1 (818) 444-5221ACC52ECx_Rev_1.pdf Link to comment Share on other sites More sharing options...
jongjin86 Posted December 17, 2015 Author Share Posted December 17, 2015 Thank you for answered my question. NT 100 to update the manual setting method. System PowerPmac - NT100(converter) - ATI FT Sensor Please answer about my question. Thank you. FT sensor Manual https://www.ati-ia.com/app_content/documents/9610-05-1022.pdfNT100.pdf Link to comment Share on other sites More sharing options...
jongjin86 Posted December 17, 2015 Author Share Posted December 17, 2015 NT 100 ManualNT100.pdf Link to comment Share on other sites More sharing options...
Omron Forums Support Posted December 17, 2015 Share Posted December 17, 2015 Assuming you have followed the NT 100 manual and set up the device correctly using their, "netDevice" software; then you are ready to follow the ACC-52ECx manual starting on page 23 through page 33 to set up the PPMAC master. PPMAC -> NT100 (use ACC-52ECx manual page 23-33) for set up instructions. Link to comment Share on other sites More sharing options...
Recommended Posts