usamasiraj Posted September 26, 2016 Share Posted September 26, 2016 HI All, We need to communicate to the new POWER UMAC Unit With Power PC EP465EX from LabView. Is there any driver package available? Has anybody else done some work on it? I would really appreciate any help in this regard. Link to comment Share on other sites More sharing options...
steve.milici Posted September 29, 2016 Share Posted September 29, 2016 We do not currently have a driver package for LabView. We do have the Power PMAC PDK communication library that would allow a good LabView programmer to create VIs from scratch. Link to comment Share on other sites More sharing options...
shansen Posted September 29, 2016 Share Posted September 29, 2016 usamasiraj: My company has done a lot of work with LabVIEW and Power PMAC. However, we typically write our own communication drivers using raw TCP/UDP instead of using Delta Tau's gpascii over TCP. If you understand LabVIEW's TCP primitives then writing your own driver to talk to gpascii would be fairly simple. Link to comment Share on other sites More sharing options...
terrydeltasigmacorp.com Posted February 13, 2017 Share Posted February 13, 2017 usamasiraj: My company has done a lot of work with LabVIEW and Power PMAC. However, we typically write our own communication drivers using raw TCP/UDP instead of using Delta Tau's gpascii over TCP. If you understand LabVIEW's TCP primitives then writing your own driver to talk to gpascii would be fairly simple. Do you have an example of this working? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts