AutoVISION installation errors

[Omron Forums Support]

When trying to install AutoVISION software the following errors are seen: "Could not install device AcuitySim Class MachineVision" and error installing “Ferret S/W Driver”. AutoVISION software is designed to work with Windows XP – 32 bit and Windows 7 – 32bit software. Some of the files installed in the current version of software is not compatible with a 64 bit operating system. However, a configuration guide can be downloaded from the Microscan web site which describes how to configure Windows 7 – 64 bit, using Windows XP mode, to run the AutoVISION software. This configuration guide can be downloaded on the Microscan web site at: http://files.microscan.com/_att/a4a3c214-8cc1-4ab2-8ca0-3a02ca87ca31/autovisionconfigguide.pdf