Omron Forums Support Posted March 14, 2022 Share Posted March 14, 2022 Please, see below information concerning default user and password.(Case sensitive)For AutoVISION 1.x.x.x: username = Microscan and password = vision For AutoVISION 2 or higher: username = (empty field) and password = (empty field) If you have changed the default username or password and you can’t remember one of them, you can reset them to default values (as pointed above).The procedure for that is the following: Connecting to the camera by Telnet:telnet 192.168.1.100 (please, use the camera IP) Sending the command below (upper case): ->BP_RUAvalue = 0 = 0x0 (response from the camera)-> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Top Posters In This Topic
1
Popular Days
Mar 14
1
Top Posters In This Topic
Omron Forums Support 1 post
Popular Days
Mar 14 2022
1 post