Black images with Visionscape synchronous triggered job using multiple cameras

[Omron Forums Support]

The strobe should be controlled by only one camera, the second to last camera in the group. This is to ensure that no dark images are acquired due to timing between when the first and last camera are activated. For example if you have a 4 camera synchronous job and all cameras are to share one strobe, the job needs to be configured as follows: Camera 1 - no strobe selected Camera 2 - no strobe selected Camera 3 - strobe 3 Camera 4 - no strobe selected If you have a 3 camera synchronous job and all cameras are to share one strobe, the job needs to be configured as follows: Camera 1 - no strobe selected Camera 2 - strobe 2 Camera 3 - no strobe selected Finally, if you have a 2 camera synchronous job and both cameras are to share one strobe, the job needs to be configured as follows: Camera 1 - strobe 1 Camera 2 - no strobe selected