Omron Forums Support Posted March 14, 2022 Share Posted March 14, 2022 How to change the base DHCP address in the Microhawk cameras (example: 172.22.4.x): 1. Open Windows regedit. Navigate to HKLM\SYSTEM\CurrentControlSet\services\MicroscanUSBLAN. You should see a key there called DHCPBase. This, by default, is set to 0xc0a8bc00. If you convert the hex value in pairs you’ll see that it is 192.168.188.0 2. To change this to 172.22.4.0 (you cannot change the last number), enter 0xac160400 in the DHCPBase 3. Plug your camera back in and you should be all set. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Top Posters In This Topic
1
Popular Days
Mar 14
1
Top Posters In This Topic
Omron Forums Support 1 post
Popular Days
Mar 14 2022
1 post