Communication settings resulting from each type of MicroHAWK default method

[Omron Forums Support]

Setup Button default:
Does change comm settings as follows: It turns off UART, turns on VCOM, doesn't touch USB, and does reset Ethernet.

Hardware default:
Does change comm settings as follows: It turns on UART, turns off VCOM, turns off USB, and does reset Ethernet (all the same as <Zrdall>).

<Zrdall>:
Does change comm settings as follows: It turns on UART, turns off VCOM, turns off USB, and does reset Ethernet.

<Zrd>:
Does change comm settings as follows: It turns on UART, turns off VCOM, turns off USB, but does not reset Ethernet.