Omron Forums Support Posted March 14, 2022 Share Posted March 14, 2022 * check to see if it is a strobe unit. If it is, you will need to use a strobe controlled. * Be sure to use a current controller to prevent damage to the light. The pinout of this light can vary. The current pin-out should be power on pin 1, and ground on pin 3. The pin-out can also be power on pin 1, and ground on pin 2. The wire colors of the black cable with a green over-mold on the 4-pin M12 connector is: 1 = Brown 2 = White 3 = Blue 4 = Black Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Top Posters In This Topic
1
Popular Days
Mar 14
1
Top Posters In This Topic
Omron Forums Support 1 post
Popular Days
Mar 14 2022
1 post