MINI hawk X-mode slow decode performance on 1D and stacked codes

[Omron Forums Support]

Out of the box, the MINI Hawk and X-mode algorithm will decode 1D and stacked symbologies at a slow rate. This is because when using X-mode, the reader will attempt to decode Data Matrix, AND THEN attempt to decode 1D symbologies. To fix this problem, Disable Data Matrix when reading 1D symbols. If you need to read both Data Matrix and 1D symbols, use the configuration database in the Setup view. Set the number of indexes to 2, and then 'load current to index' for both database entries; they should now both be the same. Locate the Symbology column, and then select only Data Matrix for the first entry (de-select the rest), and select 1D symbologies for the second entry (de-select Data Matrix).