QX Hawk Disable Noread message prevents good read data output

[Omron Forums Support]

Problem When using ordered output, and Noread message is disabled, good read data will not output beyond the position of the noread message. Example ordered output set for: code1,code2,code3,code4 Noread message: Disabled If code2 does not decode, data output should be code1,code3,code4 actual output: Code1 Solution This was fixed in -15 firmware. Download and install firmware: http://files.microscan.com/elqNow/elqRedir.htm?ref=http://files.microscan.com/_att/d46296e3-3002-4189-9839-e7516e4e6fbb/QX_Hawk_FW_APP-15_DSP-11.zip