Jump to content
OMRON Forums

Reset the MS-890 Ethernet card

Omron Forums Support

Recommended Posts

Here is the procedure to reset the Ethernet card: Note: Restoring the Ethernet card to its factory default settings will clear all current settings except the IP address settings and the administrator password. 1. Power off the scanner. 2. Separate the MS-890 from the wiring box using the four screws in the corners. 3. Locate the reset switch between P3 and CR1 on the Ethernet card. 3. Power on the scanner while holding the reset switch down. (Hold it down for about 20 seconds.)

Link to comment
Share on other sites

  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...