Jump to content
OMRON Forums

VisionMINI or VisionHAWK constant reboot


Recommended Posts

  1. Press the AutoVISION button and connect power to the VisionMINI / VisionHAWK
  2. Wait approximately 30 seconds
  3. Open a command prompt window
    1. For a VisionMINI type in the following command
      1. Telnet 192.168.188.10
    2. For a VisionMINI Xi type in the following command
      1. Telnet 192.168.0.100
    3. For a VisionHAWK type in the following command
      1. Telnet 192.168.0.10
  1. Press the Enter key and you should see the prompt, [SAFE-KERNEL]
  2. Enter the following commands,  Followed by the enter key: (case sensitive)
    1. BP_Dump
    2. cd “/tffs0/Config/Focus”
    3. xdelete “*.acq”
    4. reset

Operating System

Any

Link to comment
Share on other sites

  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...