Raghav Posted June 15, 2022 Share Posted June 15, 2022 Dear All, I'm trying to save a project after building and downloading successfully. Unfortunately, it throws a list of error stating that the files are READ-ONLY. Also the variables created are accessible until PMAC is powered off. Once powered OFF all the parameters are missing. Can I know what causes these issues? Thank you. Quote Link to comment Share on other sites More sharing options...
Omron Forums Support Posted June 15, 2022 Share Posted June 15, 2022 The parameters are not accessible after reboot because the save failed. Are you able to save immediately after issuing "$$$***"? Can you show the error message? Quote Link to comment Share on other sites More sharing options...
Raghav Posted June 19, 2022 Author Share Posted June 19, 2022 Nope it's the same error.. Shortened version " cp: cannot create directory `/opt/ppmac/usrflash/Project/System': Read-only file system .... (more lines of the similar affect) cp: cannot create regular file `/opt/ppmac/usrflash/Database/pp_prog.sym': Read-only file system cp: cannot create regular file `/opt/ppmac/usrflash/Database/pp_subprog.sym': Read-only file system Successful: SaveConfiguration using /var/ftp/usrflash/Project/Configuration/pp_save.cfg Successful: SaveCustomConfiguration using template /var/ftp/usrflash/Project/Configuration/pp_custom_save.tpl Saving To Flash: Please do NOT Power off until Finished!!! Available disk space = 175096K 6960K Required disk space = 6960K Saving To Flash: Copying files to flash Saving To Flash: Syncing files to flash Saving To Flash: Mounting the flash Saving To Flash: Finished SAVING to flash Save Completed" Quote Link to comment Share on other sites More sharing options...
steve.milici Posted June 20, 2022 Share Posted June 20, 2022 I might suspect the FLASH module has a file system corruption that is preventing the FW from changing the read/write file property. What is the FW version and SN of this PMAC? Quote Link to comment Share on other sites More sharing options...
Raghav Posted July 20, 2022 Author Share Posted July 20, 2022 (edited) Hi Steve, Apologies for the late reply. The S/N of the card is P927270 and Firmware is 2.3.2.5 Thank you. Edited July 20, 2022 by Raghav Quote Link to comment Share on other sites More sharing options...
steve.milici Posted August 2, 2022 Share Posted August 2, 2022 This may be repairable with a re-image. Contact your local Omron repair center or distributor to start a repair. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.