zhangzheng2277 Posted June 18, 2023 Share Posted June 18, 2023 Hi I tested that the communication between ck3e and nx1p2 through the eip protocol according to the manual was not successful, and the ck3e firmware version is 2.7.0.0. Quote Link to comment Share on other sites More sharing options...
steve.milici Posted June 19, 2023 Share Posted June 19, 2023 Power PMAC is an EtherNet/IP (EIP) adapter (slave) and will connect to an EtherNet/IP (EIP) scanner. The steps documented in the IDE manual have been fully tested with Omron’s NJ/NX controllers. This would be a technical support issue. Please contact your local Omron technical support with your full issue details. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.