WuBill Posted May 11, 2010 Posted May 11, 2010 I'm having problems finding info on setting up a coordinate system with a geo brick. Can anyone point me to the right direction with the manuals or online documentation. Thanks
steve.milici Posted May 12, 2010 Posted May 12, 2010 Setting up a coordinate system in the Geo Brick is the same as for any Turbo PMAC. This is documented in the Turbo PMAC User Manual in the section "SETTING UP A COORDINATE SYSTEM" starting on page 255 (electronic page 271). Use the following link to access rhis manual on our WEB-site (paste the link into your browser): http://www.deltatau.com/manuals/pdfs/TURBO%20PMAC%20USER%20MANUAL.pdf?id=634085747626458180
Recommended Posts