JeffLowe Posted February 15, 2011 Share Posted February 15, 2011 I recall in the training classes that we could use the controls developed to support the IDE in our own software, ie use your position and status displays and terminal to develop our own .net based HMI.Are there any example VS projects of how to do this? Link to comment Share on other sites More sharing options...
bradp Posted February 16, 2011 Share Posted February 16, 2011 This is all contained in the PowerPmac component library which is a software development package similar to the old Pcomm used in Turbo Pmac. Link to comment Share on other sites More sharing options...
JeffLowe Posted February 16, 2011 Author Share Posted February 16, 2011 This is all contained in the PowerPmac component library which is a software development package similar to the old Pcomm used in Turbo Pmac. Ok, I'll bite. Where does one get this package, what is it's part number/name, and what does it cost? Same questions for the IEC 61131 package. On a related note, since Visual Studio 2008 has been discontinued is Delta Tau going to be moving their platform to 2010? Link to comment Share on other sites More sharing options...
bradp Posted February 16, 2011 Share Posted February 16, 2011 First was answered in an e-mail. IEC61131 is not released yet. But if you are willing to do some testing that would be good. Most likely in the July 2011 release. Link to comment Share on other sites More sharing options...
Recommended Posts