fjw617 Posted June 18, 2014 Share Posted June 18, 2014 Hello, I am studying system identification based on PMAC(sine sweep). But my motor don't move when I sent to a pLC program. My sine sweep is as follow in the txt-file. Who can give me an answer? Thank you !sweep.txt Link to comment Share on other sites More sharing options...
Sina.Sattari Posted June 18, 2014 Share Posted June 18, 2014 Two suggestions: 1. Remove the CMD "EndGat" from PLCC0, as you're trying to execute this command every RTI. 2. Issue an #1o0 command before enabling this plc. Link to comment Share on other sites More sharing options...
fjw617 Posted June 19, 2014 Author Share Posted June 19, 2014 Two suggestions: 1. Remove the CMD "EndGat" from PLCC0, as you're trying to execute this command every RTI. 2. Issue an #1o0 command before enabling this plc. Thank you for your help。 I will have a try. Link to comment Share on other sites More sharing options...
Recommended Posts