buaame414 Posted July 3, 2016 Share Posted July 3, 2016 I'm new to PMAC.How can I build up conmmunication between Turbo PMAC2 UMAC and Pewin32PRO2 with ethernet? Thank you for your answer. Link to comment Share on other sites More sharing options...
Omron Forums Support Posted July 5, 2016 Share Posted July 5, 2016 In the Programs list in the Start menu, go to PMAC Executive Pro2 Suite \ Delta Tau Common, and in the PDF "PComm32 Driver Installation Instructions", see the section under "Non-Plug and Play [ETHERNET] Devices – Installation". Note that newer UMAC CPUs have write protection that must be disabled with jumper E1 before the IP address can be changed. Please contact Delta Tau Support if you have any trouble: Contact: West Coast Headquarters Phone: (818) 717-5656 E-mail: support@deltatau.com Office Hours: 8am-5pm PST Greg Schons Direct Phone: (818) 717-5681 GSchons@DeltaTau.com Link to comment Share on other sites More sharing options...
buaame414 Posted July 13, 2016 Author Share Posted July 13, 2016 I did it as recmmoned,but failed. When I do as the follow picture,it succeed.Thank you anyway. Link to comment Share on other sites More sharing options...
Recommended Posts