andreychip Posted May 24, 2017 Share Posted May 24, 2017 Hello! version firmware 2.3.1.0, can be installed on the Power Clipper? If old version firmware 2.1.1.3. Link to comment Share on other sites More sharing options...
andreychip Posted May 25, 2017 Author Share Posted May 25, 2017 Hello! version firmware 2.3.1.0, can be installed on the Power Clipper? If old version firmware 2.1.1.3. After installing PowerPMACIDE_3_0_0_2, the MODBUS does not work on the controller PowerPmacClipper. Firmware 2.1.1.3. Kernel Version 3.2.21. Cpu Type 465 Basic error MODBUS SOCKET SEND/RECV ERROR. ModbusRegister 1,0,2=0,0 stdin:2:1: error #82: MODBUS SOCKET SEND/RECV ERROR: ModbusRegister 1,0,2=0,0 ModbusHoldingRead 1,0,2,P100 stdin:4:1: error #82: MODBUS SOCKET SEND/RECV ERROR: ModbusHoldingRead 1,0,2,P100 Link to comment Share on other sites More sharing options...
steve.milici Posted May 26, 2017 Share Posted May 26, 2017 Modbus is firmware dependent. It is not affected by the IDE version. Check your Project and Configuration. Please contact our Technical Support group for further assistance at support@deltatau.com. Link to comment Share on other sites More sharing options...
Recommended Posts