xuantran Posted June 6, 2019 Share Posted June 6, 2019 Hi, I always get AmpFault and I2TFault errors every time I download the project into PowerBrick. The only way to clear them is to save it and $$$. Has anyone experienced this issue? Link to comment Share on other sites More sharing options...
steve.milici Posted June 6, 2019 Share Posted June 6, 2019 It may be possible there are “race” conditions in your startup code (pp_startup.txt, .pmh, power-on PLCs) and subtle differences in timing between an IDE’s “Build and Download” and a full FW project load on PMAC reset that cause this. This is best handled as a technical support issue. Please contact ODT's technical support at: ODT-Support@omron.com Link to comment Share on other sites More sharing options...
Recommended Posts