orhirshfeld Posted August 12, 2019 Share Posted August 12, 2019 We have NY-51 Controller with Linux Ubuntu installed We have some issues with our EtherCAT communication and we wish to diagnose it. But we are suffering many crashes when we are using Diagnosis mode in EtherCAT. We tried the IDE on different PC but got the same results it's very frustrating and hard to diagnose the problem We are using IDE version 4.1.0.25 did you encounter a similar problem? is there a way to slove it? Can we use EC-Enginner by Acontis to diagnose the communication? Link to comment Share on other sites More sharing options...
steve.milici Posted August 14, 2019 Share Posted August 14, 2019 You should upgrade to the latest version of the IDE. This can be found on the Omron website here: https://automation.omron.com/en/us/products/family/PMAC%20IDE If you encounter any issue upgrading please contact ODT's technical support for upgrade details at: ODT-Support@omron.com Link to comment Share on other sites More sharing options...
Recommended Posts