wbzhong Posted February 24, 2022 Share Posted February 24, 2022 Hi, is there any way to persist data/status in the motion/plc script? We would like to recover some persisted data/status after power on. Quote Link to comment Share on other sites More sharing options...
wanwan Posted March 3, 2022 Share Posted March 3, 2022 I have a method I don't know if it can help you, that is to write the data to be saved to "pp_custom__save.TPL" in "configuration" under the project, but you need to "fsave" before restarting, so that the variables can be saved data. 1 Quote Link to comment Share on other sites More sharing options...
Alex Anikstein Posted March 3, 2022 Share Posted March 3, 2022 "pp_custom_save.tpl" and using fsave is the "officially" supported method by the firmware. There are other methods that can be implemented by the user, though. If you contact your appropriate Omron support team, they should be able to provide you copies of two application notes ("Using a USB Flash Drive with Power PMAC" and "Using Power PMAC’s User Folder to Save Data") which detail methods. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.