Alex Anikstein Posted August 18, 2020 Share Posted August 18, 2020 As of late 2020, the locations for the firmware and IDE have moved. Previous versions of both are still being kept on the Delta Tau website, available through the for firmware (forums account required) and the Software Center Updates page for software. However, the distribution methods for each have changed for future versions.http://forums.deltatau.com/filedepot/ [FILE REMOVED] Future versions of the IDE are available instead from the Omron Industrial Automation website: https://automation.omron.com/en/us/products/family/PMAC%20IDE Future versions of firmware can typically be distributed directly to customers through Omron Distributors rather than being available for download for anyone. If you need to upgrade the firmware on your unit or obtain a specific other version, contact your Omron Distributor for more information. You may need to provide some information about the product so that the correct file and procedure are provided. These can be obtained by issuing "CPU", "TYPE", and "VERS" into the terminal window, so please be prepared to provide the responses to these commands, too. NOTE: Users have occasionally reported xml errors when attempting to download some of these links. If that occurs, please try again later (these are intermittent issues) or contact your local Omron office and we will try to get you the files another way. Quote Link to comment Share on other sites More sharing options...
JeffB Posted September 11, 2020 Share Posted September 11, 2020 The link on the Omron website seems broken. Worked a few weeks ago. <?xml version="1.0" encoding="ISO-8859-1"?> AccessDenied Request has expired 21600 2020-09-10T18:56:20Z 2020-09-11T03:09:57Z 49A2AABDAC05A67E LvJzy0IA39ti1CA5JfWrgKbtl4FvOyj5XM/u7mq2LFG92mNwlrDTHPHa2ldOV5F41k5kvBuiYrg= Quote Link to comment Share on other sites More sharing options...
Alex Anikstein Posted September 11, 2020 Author Share Posted September 11, 2020 It looks like it just went down for a few hours for some reason--it was down last night (I tested it, too), but it appears to be working again now. Quote Link to comment Share on other sites More sharing options...
Alex Anikstein Posted October 13, 2020 Author Share Posted October 13, 2020 Power PMAC IDE v4.4.1.7 has been released and is now available on the Omron Website through the "Power PMAC IDE Download" link. Quote Link to comment Share on other sites More sharing options...
JeffLowe Posted October 13, 2020 Share Posted October 13, 2020 Power PMAC IDE v4.4.1.7 has been released and is now available on the Omron Website through the "Power PMAC IDE Download" link. Links please? The previous link is dead. Quote Link to comment Share on other sites More sharing options...
mark amato Posted July 29, 2022 Share Posted July 29, 2022 Hello, Is there a way to download 3.x IDEs in order to support older installations with the EtherLAB stack? Quote Link to comment Share on other sites More sharing options...
Alex Anikstein Posted August 1, 2022 Author Share Posted August 1, 2022 In general, all of our software is distributed for customers in the Americas through the Omron website now. If you search for "PowerPMAC IDE 3", you will see a number of versions available for download, including 3.1.4.0, our final release of version 3. Quote Link to comment Share on other sites More sharing options...
Sanjay_RSS Posted December 9, 2022 Share Posted December 9, 2022 For anyone awaiting it, the new 4.6.0.14 version of the IDE has been posted to the main Omron PowerPMAC IDE webpage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.